Suspending Embeds

Home

Using suspended embeds to create illusion.

If you don’t like the finished product, no problem... See: Starting Over.

Method #1: Sinking
This is very tricky. Correct timing is critical and is something you will acquire with practice. Suspension depends both on the temperature of the gel and the weight of the object(s) you are embedding. Wait until the
gel begins to set or get sticky. Place the object on the surface and allow it to sink into the gel.

Method #2: Layers
Pour the gel in layers. Allow the surface to skin or semi-harden, place your object and then pour over it. Then prepare your next layer. If a line becomes visible between the pours, simply slide your skewer around the
inner rim of the glass as you are pouring, and the line will disappear. Be careful not to skewer between an embedded item and the glass, or you could end up with an undesirable air pocket.

Method #3: Chunks
Load the glassware with un-melted (clear or color, scented or unscented) chunks of gel. Place embeds where you want them. Then pour the melted clear gel over all. A skewer is helpful for controlling objects if they
fall or move. If your suspended items start to sink, pull them up with your skewer as the candle cools, but beware, as this may cause bubble you don’t want. You can hasten the candle’s cooling time by briefly placing the candle in the refrigerator or freezer. (See: No Bubbles & Cloudy Gel )

This information is provided with the understanding that the author and publisher are not engaged in rendering legal, financial, or other professional advice. Laws and practices often vary from state to state and if legal or other expert assistance is required, the services of a professional should be sought. The author and publisher specifically disclaim any liability that is incurred from the use or application of the contents of this publication / website.

Gel candles may resemble a beverage or food product. All pictures and references are "non-edible" items made of nonfood (wax, glass, etc.) components. Be certain that you understand the steps and precautions in making any gel candle design and in using the gel candles. Failure to follow instructions could result in fire, injury or smoke damage. If you have any questions contact your Supplier.

It is not recommend to use flammable items, dead sea creatures, or real food items in gel candles. It is recommended that you double glass your designs, with the wick and gel in the inner glass, away from the design and gel in the outer glass. It is up to the designer to ensure that the design is safe for the end user. You/Designer should provide instructional warnings to end user, especially to not leave any burning candle unattended.

Never leave a burning candle unattended. This material is NOT intended to be used by or made by children under 18 years of age without close adult supervision. Keep all candles (gel, soy, wax) away from children. Anyone younger than 18 years of age needs adult supervision to make or handle Gel Candles. safety

Burn candle only on a stable, heat-resistant surface for no more than four hours at a time. If flame gets too large or exposed wick is greater than 1/4 inch, extinguish flame and trim wick. Keep away from drafts and flammable material. Do not allow matches or wick trimmings to fall into melt pool. Never burn the last half of a candle. Do not move while burning or if gel is still hot. Keep wick centered and trimmed to 1/4 inch to prevent smoke and soot buildup. Do not extinquish gel with water -- if possible smother the flame, or use baking soda for small flames, or a fire extrinquisher.

Get updated information about the gel from Penreco, Before lighting any candle (gel or wax) review safety precautions here. If you have any questions contact your Supplier; if you are the end user contact your Gel Candle Maker.

The opinions expressed by the authors and advertisers are not necessarily those of this website, corporate directors, officers and employees; nor is website endorsing any product or company, nor is it responsible for any information presented herein. Disclaimer.